JeeLink RFM69CW to USB Transceiver 433Mhz
The JeeLink is a fully assembled and ready-to-use USB-type “stick” which plugs directly into a PC, Mac or USB hub. It contains Atmel’s ATmega328p AVR microprocessor, HopeRF’s 433Mhz RFM69CW wireless radio module and a branded FT232R USB interface chip.
Useful to adding RF capability to a Raspberry Pi / emonHP to receive data from emonTx or emonTH.
We can preload the RFM2Pi firmware which has been re-compiled for the JeeLink with either the JeeLib Classic (compatibility) firmware or the new Low Power Labs firmware.
To use the JeeLink with emonHub, use the following config:
Type = EmonHubOEMInterfacer
com_port = /dev/ttyUSB0
com_baud = 38400
pubchannels = ToEmonCMS,
subchannels = ToRFM12,
nodename = RF