WiFi ONLY: Open Vehicle Monitoring System (OVMS)

WiFi ONLY: Open Vehicle Monitoring System (OVMS)

£203.92 (Inc. VAT)
£169.93 (Ex. VAT)
Weight:
600.00 Grams
Current Stock:
Adding to cart… The item has been added
Description

ovms4g.png

Open Vehicle Monitoring hardware with 4G / WiFi connectivity. 

Features

  • Real time EV telematics
  • OBD2 connection
  • Android / iOS app
  • Fast and responsive
  • Remote Climate Control
  • Charging status notifications
  • Developer friendly API
  • Open-source ♥

Get it on Google Play

Metrics

  • State of charge (SoC)
  • Range
  • Charging speed
  • Odometer
  • Battery temperature
  • State of health
  • TPMS
  • 12V aux battery
  • Plus more...  

Technical

  • V3.3 2022 Hardware Revision
  • Connectivity: WiFi  
  • Firmware update via OTA (WiFi), by Micro SD card, or over USB interface
  • Processor: ESP32 WROVER (160/240MHz, 16MB flash, 4MB SPI RAM, 520KB SRAM)
  • Processor core: Dual-core
  • Processor frequency: 160MHz/240MHz
  • Ports: Micro-USB, microSD, Internal Expansion Slot, DB9 Car Port, DB26 Expansion Port
  • Micro SD card logging
  • ODB2 output 
  • CAN bus no.: 3
  • Dimensions: 110mm x 80mm x 30mm

Certification

Compatibility 

Included 

Choosing correct ODB2 cable

The correct OBD2 cable should be chosen to match the car, some cars e.g LEAF, Tesla & Kia Soul have specific cables.

All other cars use the generic cables which are available with the cable either coming out of the left-hand or right-hand side of the connector. The orientation of the connector can vary between RHD / LHD models and even different variants of the same model therefore it's advised to check in your car. Here are a list of cars and cable which have been known to work. 

  • UK RHD Kia e-Niro - Generic Left
  • UK RHD Hyundai Kona - Generic Left
  • Renault Twizy - Generic Left or Right 
  • MG ZS EV - Either Generic Right or Left will work, users have reported that using a Right cable allows for more tidy install

Note: an OBD2 extender or splitter can also be used if required, however ensure whatever extender/splitter is used has all the pins connected. 

 

Resources 

Support 

OVMS Forum

OpenEnergyMonitor Forums

OpenEnergyMonitor Support Email: support@openenergymonitor.zendesk.com

OVMS Support Ticket (login required)

 

Dimensions  

DEPTH 30 mm
HEIGHT 80 mm
WIDTH 110 mm